..

.
Focus On Flow
 
Our Free Newsletter 
Sign Up Now!

 

dot dot Flo-Tote 3 Specifications

SENSOR

Velocity Measurement

Method: Electromagnetic (Faraday’s Law)

Range: -5 to +20 feet per second (-1.5 to +6.1m/s)

Accuracy: ±2% of reading, ± 0.05 zero stability at 0 to +10 ft/sec (0 to + 3m/sec)

Zero Stability: ±0.05 feet per second (±0.015m/sec)

Resolution: 0.01 feet per second (± 0.003m/sec)

Level Measurement

Method: Submerged pressure transducer

Range: Standard 0.4 to 138 inches. (10mm to 3.5m) Optional 0.4 to 276 inches

Accuracy: ±1% of reading

Zero Stability: ± 0.03 ft. (± 0.009m) zero stability for 0 to 10 ft (0 to 3m). Includes non-linearity, hysteresis and velocity effects.

Resolution: 0.1 inch (2.5mm)

Over Range Protection: 2 X range

Flow Measurement

Method: Conversion of water level and pipe size to fluid area. Conversion of local velocity reading to mean velocity. Multiplication of fluid area by mean velocity to equal flow rate.

Conversion Accuracy: ±5.0% of reading. Assumes pipe is 10 to 90% full and with a level greater than 2 inches

Temperature Measurement:

Method: 1 wire digital thermometer

Range: 14º to 185ºF (-10º to 85º C)

Accuracy: ± 6 F (3.5C) degrees

Material

Standard: Polyurethane

Dimensions: 5 3/16"(131.8mm) L, 1 ¾ " (44.5mm)W, 1 1/8" H (29mm)

Weight: 2.5 lbs. (with 30 feet of sensor cable)

Operating Temperature Range: 32° to 113° F (0° to 45° C)

Storage Temperature: -4º to 125º F (-20° to 52°C)

Sensor Cable

Material: Polyurethane jacketed

Standard Length: 30 ft. (9m)

Optional Length: 60 ft. (18m),100 ft. (30m) or length as needed (maximum 1000 ft/300m)

FLO- LOGGER

Data Storage

64K (16K cycles of velocity/level data)

Local Terminal

RS232C at 19.2K baud

Power Requirements

Two 6-volt lantern batteries

Battery Life

Typical - 16 weeks at a sample interval of 15 minutes (with recommended batteries)

Housing

Sealed watertight PVC – meets IP68 rating

Length: 13.85 in. (35.179 cm)

Diameter: 7.75 in. (19.685 cm)

Weight: 7.5 lbs. (3.4 kg) (including batteries)

Temperature

Operating Range: 14° F to 125° F (-10° C to 51° C)

Storage Temperature Range: -4° F to 125° F (-20° C to 51° C)

Sensor/Logger Disconnect

Both the sensor and the logger have waterproof (IP68) connectors for easy separation from the interconnecting cable.

Certification

FCC Rules Part 15

Industry Canada RSS 210

No user license required.

FLO-STATION

Data Storage

64K (16K cycles of velocity/level data)

Local Terminal

RS232C at 19.2K baud

Outputs

(4) 4-20 mA isolated outputs scaleable to desired values and capable of sinking 50 ohms each. Contact Closure (One form C dry).

Power Requirements

+12VDC @220 mA with three 4-20mA outputs @ 20Ma

Housing

NEMA 4X (IP66/67-7)

Material: Polystyrene

Dimensions: 9 in. W x 7 in. H x 4 in. D (229 mm W x 178 mm H x 102 mm D)

Weight: 2.75 lbs. (1.25 kg)

Temperature

Operating Temperature Range: 14° to 122°F (-10° C to 50° C)

Storage Temperature Range: -4° to 122°F (20° C to 50° C)

Contact factory for Sensor Mounting Hardware Ordering Information

 

dot dot

Flo-Tote 3 Specifications

dot

 
Address: Marsh-McBirney, Inc. 4539 Metropolitan Ct. Frederick, Maryland 21704 USA
Telephone:
U.S. and Canada 1-800-368-2723 - Outside the U.S. 1-301-874-5599 - Fax: 1-301-874-2172

Copyright Marsh-McBirney, Inc.  All rights reserved.